The company has the ability to supply and produce various types of goods in this sector, using the many experiences of its engineers and experts in the field of oil, gas and petrochemical industries as the main field of activity, in the following three forms.

           1. Rotary machines and fixed machines

Manufacturing of parts and spare parts for various parts of the industry, including parts for rotary machinery, parts or spare parts required in the fix machinery sector, including hydrostatic devices and heat exchangers Tanks, dryers, air conditioners and special fittings referred to below.

           2. Design and manufacture of demister pads

Since 2006, after the marketing and refining needs of the country's refineries, the company has begun to research and develop and finally construct the demistraps, and is now proud that a large volume of demister pad in Iran's refineries will be produced by the company. To be

           3. Support management of supplying and supplying parts

Support management of supplying and supplying various types of parts and equipment with the desired quality and in accordance with the requirements and international standards approved by the inspection department of the oil industry, including various types of bolts and nuts (Nut & Bolt (Super Bolt) in terms of gender, size, supply of all types of valves Pipes, tubes, tubes, special materials such as Ni Base alloys and Copper Alloy alloys and Stainless Steel grades from reputable companies based on standard requirements and control and monitoring. Production processes and obtaining required certificates.

The range of services offered in this section includes:

1. The company is able to manufacture and produce various spare parts for Centrifugal and Reciprocating pumps including Shaft, Sleeve, Wear Rings, Unpaired and double-ended impellers and all internal components of the pump assembly using the reverse engineering method.

It should be noted that the company has the ability to provide a hydraulic map for Impeller parts and Casing Pumps.
The company is proud to have been able to manufacture all spare parts for pumps as well as the production of Complete Massy Rotor for Japan's Mitsubishi 3000 round of centrifugal pumps. So far, more than 700 units from a total of 130 pumps Mitsubishi Heavy Induces "MHI" has been constructed for various companies in the oil industry, especially Kharg petrochemical company.

The company has also succeeded in the success of all KSB Guinard vertical sea water pumps (shaft lengths over 3200 mm) and Intermediate Casing & Intermediate, Bell Mounth, suction casing, Guide Vane made of stainless steel 316 cast iron with a nickel content of 21% and other components including Space, Impeller, Sleeve, Wear Ring, Coupling ... from stainless steel 316 and get approval from employers.

Apart from the above, the production of spare parts for pumps from other companies, such as Dosapro Milton Roy and Wirm, Worthington, Byron Jackson Flowserve, etc., is another achievement of the company in the manufacture of spare parts for centrifugal pumps and reciprocating pumps.

2. Designing and manufacturing a variety of Shell & Tube Shell & Tube Heat Exchangers under ASME codes, TEMA APIs, etc. in various design types such as DFT, AFM, BEU, BET, BEM, etc.

3. Design and manufacture of various types of Fin Tube exchangers including aircoolers (Aircooler, Oilcooler) and a variety of Air Dryer or Air Dryer Vertical Fintubes Assy Dryers.

4. Design and manufacture of atomic reservoirs under atmospheric pressure under horizontal and horizontal pressure under ASME code, ANSI, API and ....

5. Designing and manufacturing portable horizontal or vertical portable tanks ISO TANK to move acidic, playable or neutral fluids under ASME code, ANSI, API, IPS.

6. Providing repair services related to heat exchangers, manufacturing various components of air conditioners and providing technical and engineering services including: examination, presentation of plans for increasing efficiency and consulting in the field of thermal and mechanical design of process equipment.

7. Construction and optimization of Cooling Tower cooling towers, including trays and other components used in towers, and optimization of the bolts and nuts used in the tray using teflon coating for retrofitting Corrosion and ease in basic conversions.

8. Designing and manufacturing mixer mixers with metal body, polymer or composite body; Fit to mixer type and function.

9. Designing, manufacturing and reverse engineering of various types of complex casting and supplying complex casting parts with specialty and anti-abrasion.

10. Supplying and manufacturing of various manufactured spare parts Compressors & Turbines Compressor & Turbine Soare Parts Includes Cold & Hot Turbines

11. Construction and installation of components and components of high gearboxes related to Turbine Turbine and Compressor Compressor with the cooperation of European companies such as "Stork N.V." and ....

12. Construction and installation of components and equipment for water supply lines, such as Evaporator components, including Nozzles, Tubes and Tubesheets, etc. It is necessary to explain that the successful engineering company of the innovative industry has received approval from Sidem Company and as the sole agent for the sale of tubes Tubes Alluminium-Brass & Titanuim The equipment of this company is operating in Iran.

13. Supply of all types of metric and inch bolts, as well as various types of coated bolts and joints. Teflon Coat resistant to corrosion in extremely critical environmental conditions without any changes in mechanical properties is another activity of this company. It should be noted that all bolts and The parts supplied by this company have a Certificate Material & Mechanical from the laboratories and a German Loyds Inspection Certificate from Germany.

· Performing engineering and execution of the Paper Work projects

· Mapping and preparation of manufacturing maps of components and equipment

· Providing a technical manual containing all technical specifications for the parts including material information, drawings and ... In accordance with the fundamentals of providing the technical manual of the Atti Industry Company, originally approved and approved by Spec

· By obtaining knowledge of providing and providing a hydraulic map for parts such as Impeller and Casing, and analyzing fluid motion capable of dispatching equipment and experienced people to the sites for mapping and providing specifications (this is especially true in It is important to note the pieces that are considered in terms of the inventory count and the importance of the piece with the sending restrictions outside the complex.)

592/5000

Advantages:

1. To obtain accurate information on the motion of the fluid in the Impeller, Casing, which causes the process to implement reverse engineering techniques, errors in these types of components, such as manufacturing errors, etc., in the hydraulic section of these components are identified and resolved.

2. Achieving Modeling Modeling Plans for Parts

3. Possibility of measuring at the site

4. Possibility to control and support the model parts

5. In this method, it is not necessary to prepare the model by the method of returning with resin or other traditional methods. Using the modern equipment in the country, the profile of the section is generated without error by the 3D printing and prototype.

· Compilation of spare parts database for pumps:

The company is now utilizing its vast experience in manufacturing pump spare parts, a database of spare parts for pumps from MHI (Mitsubish Heavy Industrial), Japan, and able to identify 70% of pump components with Use P / NO of the manufacturer. These parts can be identified by the size and type of pump and the technical details of the MHI company.

· Engineering and management of supply of goods:

Due to the exact recognition of the production lines and industrial equipment of the industries, especially the oil and petrochemical industries, and recognizing the needs of those units, and considering the extensive communication with the sources inside and outside the country, the company has the possibility to supply the goods as specialized It has, and as a technical and engineering link, a very important role in this industry, by creating knowledge of management and supply engineering.

Provision of specific Valve Switches S.Steel & Copper Alloy Tubes, Vacium and .... are among the company's activities in this field.